![background image](http://html2.mh-extra.com/html/raven/slingshot/slingshot_installation-manual_3833300015.webp)
CHAPTER
3
Manual No. 016-0171-408
7
English
Chapter 3
Base Station
Installation & Start Up
Contact your regional Raven Sales or Precision Agriculture Specialist to coordinate installation and set up of
the Slingshot™ base station.
Note:
Be sure that all required items outlined in Chapter 2, Introduction & Preparation, have been
completed prior to installing the base station.
The following sections contain instructions for installation and start up of the base station for reference during
the installation and set up of the base station.
Base Station Connections
1.
Setup the Slingshot base station unit in the prepared location.
Note:
The base station tray is compatible with a 2U 19” [48 cm] server rack for optional mounting.
FIGURE 1.
Base Station Connectors
2.
Connect the base station antenna cable to the TNC connector on the base station.
3.
Connect the cable from the surge protected ethernet ‘OUT’ port on the back of the UPS to the ethernet port
on the base station.
Ethernet
Port
TNC Antenna
Port
3-Pin Power
Adapter Port
3A Fuse
Ground
Power
(+12
VDC)
Keyway
No Connection
UPS
Management Port
Summary of Contents for Slingshot
