Raven SCS 460, Installation Manual

Page: 12 / 28

C
HAPTER
3
8 SpraCoupe 3000/4000 with SCS 460 Console AccuBoom Installation Manual
FIGURE 2. Field Computer Cable Connection
3. Connect one end of the CAN power adapter cable to the Envizio Pro or Viper Pro interface cable.
4. Route the red power and white ground wires toward the battery.
NOTE: Do not connect the power and ground wires at this time. The power and ground wires will be
connected at a later phase of the AccuBoom installation.
INSTALL THE ACCUBOOM NODE
FIGURE 3. AccuBoom Cable Connected to Node and H-Driver
1. Connect the large, rectangular node connectors of the SCS 460 console CAN AccuBoom
cable (P/N 115-1001-008) into the correct ports of the AccuBoom node.
2. Tighten the bolts on the node connectors to secure the connections.
3. Connect the smaller connectors of the SCS 460 console CAN AccuBoom cable to the 5-channel
H-driver (P/N 063-0172-753).