![background image](http://html2.mh-extra.com/html/raven/scs-460/scs-460_installation-and-service-manual_3828914028.webp)
23
11)
DATA LOGGER TRIGGER UNITS
a)
Display will show
DATA LOG TRIGGER UNITS FEET [METER]
.
b)
Depressing
momentarily changes the display between
DATA LOG TRIGGER
UNITS FEET [METER]
and
SEC
.
DATA LOGGER TRIGGER VALUE has been
programmed previously. (SEC means seconds has been chosed as the unit of measure.)
c)
Momentarily depress to advance to DATA LOGGER.
10)
DATA LOGGER TRIGGER VALUE
a)
Display will show
DATA LOG TRIGGER VALUE 0
.
b)
Enter the TRIGGER VALUE.
c)
Momentarily depress to advance to DATA LOGGER TRIGGER UNITS.
6)
GPS FILE REFERENCE
a)
Display will show
GPS FILE REF 1
.
b)
Enter the GPS file number
c)
Momentarily depress to advance to GPS OPTIONS.
7)
GPS OPTIONS
a)
GPS is inactive when the display shows
GPS INACTIVE
.
The GPS features
are explained further in the GRID APPLICATION SYSTEM MANUAL.
b)
Momentarily depress to advance to FIELD REFERENCE.
8)
FIELD REFERENCE
a)
Display will show
FIELD REF 0
.
b)
Enter the field number.
c)
Momentarily depress to advance to BAUD RATE.
9)
BAUD RATE
a)
Display will show
BAUD RATE 9600
.
b)
Depressing
momentarily changes the display between
BAUD RATE 9600
and
1200
.
c)
Momentarily depress to advance to DATA LOGGER TRIGGER VALUE.
NOTE:
The TRIGGER VALUE default value is "zero". This value must be changed
to a desired number ranging from 1-9999. The DATA LOGGER features will
not work if this number is not changed.