4
016-5032-107 Rev. A
17
CAB COMPONENT INSTALLATION
IMPORTANT:
The SC1 node must be mounted horizontally with the connectors facing the front, back, left, or right of the
machine. The SC1 node cannot be mounted in a vertical orientation (connectors facing up or down).
2. Locate the ECU mounting position.
FIGURE 13. ECU Mounting Location
3. Install the HDU/SC1 mounting bracket onto the studs in the rear of the cab using the provided M6 lock nuts.
FIGURE 14. HDU Mounting Bracket Installed
4. Reinstall the wall panel behind the operator seat.
