Raven RS1, Calibration And Operation Manual

Page: 60 / 108

C
HAPTER
10
54 Raven RS1™ and RS Lite™ Calibration and Operation Manual
UT NAVIGATION BUTTONS
STARTING A JOB
Refer to the ROS (Raven Operating System) Basic Operation Manual (P/N 016-0171-539) for instructions on starting
a job and setting guidance lines.
ENGAGE STEERING
FIGURE 1. RS1 Status Widget on ROS
NOTE: If the steering widget does not appear on the screen, refer to the Viper/Viper 4+ Installation and
Operation manual (P/N 016-0171-539) for further information on adding widgets.
NOTE: The operator liability waiver must be accepted before the RS1 system can be enabled for operation.
The RS1 steering may also be engaged using the following methods:
• Tap the foot switch or rocker switch to engage RS1 features during field operation.
• Press the RS1 on-screen status widget to engage the RS1 during field operation.
Accept - Saves the changes made to the system at
the end of the setup process and returns the to the
Tools Menu.
Next - Saves the changes made to the system and
proceeds to the next step in the setup process.
Previous - Returns to the previous screen in the
setup process.
RS1 Status
Widget