Raven RS1 MD, Installation Manual, Page: 25 / 32

4
P/N 016-5030-200 Rev. A 23
CAB COMPONENT INSTALLATION
INSTALL THE RS1 CABLE
FIGURE 4. RS1 Tee Cable Connected to RS1 MD Cable
1. Connect the gray 12-pin connector of the RS1 tee cable (P/N 115-4010-004) to the mating 12-pin connector of
the RS1 MD cable (P/N 115-4010-008).
2. Connect the ENABLE connector of the RS1 MD cable (P/N 115-4010-008) to the cable of the installed foot switch
(P/N 063-0172-470).
FIGURE 5.
Mechanical Drive Connection
3.
Connect the 8-pin Deutsch connector from the RS1 MD cable into the 8-pin port of the mechanical drive
(P/N 063-4001-010).