Raven RS1 MD, Installation Manual, Page: 19 / 32

3
P/N 016-5030-200 Rev. A 17
MECHANICAL DRIVE INSTALLATION
FIGURE 15. Steering Wheel Cap Reinstalled
6. Replace the steering wheel cap.
INSTALL THE ANTI-ROTATION BRACKETS
1. Identify the anti-rotation bracket mounting location on the narrow section of the steering column.
NOTE: Depending on the machine’s configuration, the anti-rotation bracket may be installed on the left or
right side.
FIGURE 16. U-Shaped Bracket Installation
2. Secure the U-shaped bracket (P/N 107-4000-012) to the steering column using the two 4” strap clamp
assemblies (P/N 321-0000-422) and supplied nuts.
3. Tighten the nuts to ensure the bracket is installed securely.
U-Shaped Bracket
with Flange
(P/N 107-4001-012)
Strap Clamp
Assembly
(P/N 321-0000-422)