3
016-5032-127 Rev. A
9
WHEEL ANGLE SENSOR INSTALLATION
FIGURE 4. Rod-End of WAS Installed on Rod-End of Steering Cylinder
12. Install the ball mount on the rod-end of the WAS assembly on the installed hex bolt and secure it using an M10
x 1.5 lock nut (P/N 312-4000-208).
FIGURE 5. Base-End of WAS Installed on Base-End of Steering Cylinder
13. Insert an M10 x 1.5 x 35 hex bolt (P/N 311-0070-025) through the back of the WAS base end mounting bracket.
14. Install the base-end of the WAS assembly on the hex bolt and secure it using an M10 x 1.5 nylon insert lock nut
(P/N 312-4000-208).
15. Orient the WAS so the cable plug is oriented as shown in Figure 5 on page 9.
Rod-End of
WAS
M10 x 1.5 Lock Nut
(P/N 312-4000-208)
M10 Universal Ball Mount
(P/N 103-0001-029)
