20
Marking a Field Boundary
1. Touch the
Scout tab
and then the
Record
button.
2. Select
Zone
from the list of features.
3. The Record Field Feature screen displays. Select
Field Boundary
and select
the point entry and offset your
options
, and touch
OK
.
Note:
The Field Boundary will automatically close if the machine comes within
one boom width of the starting point. To manually close the boundary,
touch the
Finish
button in the Map area and select the zone or feature to
close.
Seed Blockage Sensors
The status of optional seed blockage sensor loops will be displayed on the main
screen of the Viper Pro and will allow the operator to monitor status of seed or
product flow at the sensor locations throughout a seeding operation.
The seed blockage status indicators will display:
Green when the system is operating normally.
Yellow when a product blockage or dirty sensor is detected in
the system. Check the indicated sensor locations in the
Blocked display and clear any obstructions as necessary during
operation.
Red if a communication issue is detected with the seed
blockage sensors. Check sensor assemblies and cables for
disconnected or damaged parts and replace parts as
necessary.
