Raven Command FLEX II, Calibration And Operation Manual

Page: 55 / 144

CHAPTER
5
016-0171-702 Rev. A 45
CHAPTER 5
PRECISION FARMING SETUP
The precision farming setup allows the user to modify configurations that may not be available through the
universal terminal.
IMPORTANT: Depending upon the universal terminal, the following settings and options may or may not affect actual
application or system operation.
To adjust precision farming settings after performing a machine configuration:
1. Open the UT Menu and select the RCM - Sprayer Menu button.
2. Select the Tools Menu softkey along the right side of the display.
3. Select the Applicator Setup tab along the top of the display.
4. Select the Precision Farming Setup button. Review the instructions on screen. To proceed with the wizard, touch
the Next button. The Product Delay Setup page will be displayed.
NOTE: Touch the Previous button to return to previous pages in the Precision Farming Wizard as needed.
5. Enter a Product Delay value for each product control channel. The Product Delay value is the time required for
the product control system to adjust when changing rate zones using a prescription map.
FIGURE 1. Setup Product Delay
RCM - Sprayer Menu Tools Menu Applicator
Setup
UT Menu
Precision
Farming Setup