SBGuidance I Rev. A I IntelliSteer
Pag 16/22 I SBG-IntelliSteer-IM-EN-Rev. A
4.3.
Montage radio-antenne
Figure 7 shows the standard radio-antenna with magnetic
base. Preferably, use the standard antenna. Table 1 shows
the components of the standard radio antenna.
The following terms and conditions apply the installation of
a radio-antenna:
Mount the radio-antenna preferably with magnetic
bas on the standard GPS-antenna bracket. (Figure
10)
If a steel construction is present on the cabin roof
place the radio-antenna on top of the constrution
in stead of placing it next to the construction.
Place the magnetic base on a sufficiently large steel
surface, at least the size of the standard GPS
antenna bracket. Especially with larger distances
from the base station, a bigger steel substrate can
improve the signal strenght and prevent problems.
Optionally a panelmount antenna (Figure 12) can be
used fot mounting. For this antenna are the same
terms and conditions applyable as the standard GPS-
antenna bracket with magnetic base.
Teken
Omschrijving
1
Radio-antenna
2
Antennacable
3
Connector to terminal
4.1
Magnetic base
4.2
Panel-mount (optional)
Table 1: parts radio antenna
1
4.1
3
2
4.2
Figure 11 Components radio-antenne.
Figure 12 Mounted radio-antenna with panel
mount