C
HAPTER
3
10
ROS AccuBoom™ Calibration & Operation Manual
2. Locate and select the AccuBoom button. The AccuBoom Settings tab will be displayed.
NOTE:
Select the “Apply to all products” option at the top of the AccuBoom Settings tab to set entered
values for all control channels universally. Each channel may be adjusted individually later if desired.
“Apply to All Products” only affects the Look Ahead Options.
3. Touch the AccuBoom Enabled option to enable the AccuBoom feature to automatically control sections during
application operations.
4. Select the type of look ahead (either time or distance) for the look ahead value. Refer to the Look Ahead Type
section on page 12 for additional information on the look ahead types.
NOTE:
If distance is set as the look ahead type, the system will require a target operation speed for section
control. The system will use the target speed when controlling sections automatically.
5. Enter the desired on-look ahead value for the implement application control system. Refer to the On-Look
Ahead section on page 13 for recommendations for setting the on-look ahead values.
6. Enter the desired off-look ahead value for the implement application control system. Refer to the Off-Look
Ahead section on page 13 for additional information on recommended off look ahead values.
NOTE:
The off look ahead value should never be set higher than the on look ahead value. Review the Look
Ahead Options section on page 13 for additional information on setting and using the look ahead
values.
7. Enter the desired on AccuBoom override time. Refer to On Override section on page 13 for additional
information on the override settings or the Enable AccuBoom Override section on page 16 for details on using
the AccuBoom override during an active field operation.
8. Enter the desired turn off percent. Refer to the Turn Off Percent section on page 13 for more information
regarding the turn off percent value.
ACCUBOOM™ SETTINGS DEFINITION
ACCUBOOM COMBO NODE CONFIGURATION TAB
1. Touch the Edit icon in the Machine Configuration panel to expand the panel.
Edit
Combo Combo
