GROUNDING PROCEDURE
INSTALLATION POLE MOUNT
TRIMAST WALL MOUNT
Non Penetrating
Roof Mount
Ground Wire
Ground Wire
with Ring Clip
Ground
Lug
1/4”
Drilling
Screw
Tooth
Washer
Tooth
Washer
Ground Wire
with Ring Clip
Ground
Lug
M6
Lock
Nut
M6 x 16 mm
Hex Head
Screw
M6 x 16 mm
Self Tapping
Screw
Ground
Lug
Ground Wire
with Ring Clip
Tooth
Washer
Note:
Grounding wire and hardware are not supplied for pole mount,
trimast wall mount or non penetrating roof mount. Installation mount
and associated hardware are not supplied.
Ground Wire
Secure
Clamp
Grounding Rod
Ground Wire
(NEC Section
810-20)
Ground Block
(NEC Section
810-20)
Coaxial Cables (To IDU)
Coaxial
Cables
(From ODU)
Note:
Ground wire, secure clamp,
grounding rod, coaxial cables and
ground block are not supplied.
IMPORTANT:
All antenna sytems must be properly grounded. Refer
to NEC (National Electric Code) Article 810, 820 and local
building codes for specific requirements. Typical grounding
methods are shown as examples. Tighten all hardware securely to
assure good continuity.
5
TO GROUNDING
ROD
TO
G
RO
UN
DI
N
G
R
O
D
