First method- The first
method involves removing the
center column and inverting it
upside down. First, loosen the
center column height
adjustment lock knob. Next,
unscrew the accessory hook on
the bottom of the center
column to remove. Remove the
center column by pulling it up
and out of the center. Next
slide the center column in
upside down, making sure to
align the slit on the center
column with the tab inside the
center column shaft hole. You
may have to rotate the column
until you feel the tab align
properly with the center column indention. Adjust the shaft until the right height is
achieved then retighten the center column height adjustment knob to secure. You
may reattach the accessory hook on the top to prevent loss. Reverse the process to
use the
Second method- For the second method, start by loosening the center
column height adjustment knob and pull the center column up until it is fully
extended, then tighten the knob to secure it in place. Next, invert the legs by
pressing in the grey button leg locks and rotate the legs all the way around to the
opposite angle. Follow these steps for all three legs then turn your tripod upside
down.
How to remove the head of the Tripod
To remove the ball head from the legs, first
ensure the pan adjustment knob is fully
tightened. Next, grasp the ball head with
one hand and the tripod legs with the other
and rotate the ball head counter clockwise to
unscrew it from the legs. To reinstall, simply
attach the ball head by mounting it on the
Summary of Contents for APGL5
Page 1: ...APGL5 Model Tripod ...
Page 3: ...Identifying the parts ...
