RE/DD/UM/REVAC 1.0-01
Page 7
sequentially using the right / left arrow keys during zone output
is ON condition. After entering the suppressed fault events,
screen will be as below. The Suppressed event will be amplifier
power fault, Zone Faults.
Sup-Fault [x /y]
EVENT
Mode
Mode Selection is selected by using the cursor key, then
Enter Key to choose the mode. The REVAC has Four types of
mode namely Alarm, MIC, Music & DVA. In this modes
Display as shown below.
2. M o de : Ala rm
< Alarm >
< Mic > / < Music> / < DVA>
Alarm Mode:
The alarm mode shall be selected manually from keypad or
automatically through the RE – 900 via RS485. If the alarm mode is
selected manually then the corresponding zone to be select to
give alarm. The selected zone and mode shall be identified by
corresponding LED’s and also shown in LCD.
If there is a Fault, LCD screen display will be shown below.
A Fault [X/Y]
Type of Fault
Where “A” represents in Alarm mode.
