10
RESURFACING
Adding more water to the surface of your RAVE EZ Set Ice
Rink and allowing it to freeze will refresh the ice surface
smoothly. It is recommended that you avoid resurfacing your
ice until late in the afternoon or at night after you are done
skating for the day. When resurfacing you should evenly
spread a shallow layer of water across the entire rink area to
maintain a level, smooth skating surface. Consistently
resurfacing your ice will give you a harder top layer of ice that
will be less prone to cracking.
To remove minor cracks in the ice: Scrape enough ice shavings
with your skate or grab snow if available and pack it in the
crack tightly and wet it down. Use a puck, smooth over the ice
surface until smooth and level with the rest of the ice surface.
REMOVING YOUR ICE RINK
Allow ice to thaw completely with spring thaws. Tip down the
side of the liner in the lowest point of the ground slope and let
the water run off the liner.
1. Completely dry all parts of the unit.
2. Clean and store following instruction on page 11.