Inflating Instructions
CAUTION: DO NOT OVER-INFLATE. Use of an air compressor or
over-inflation can rupture the product beyond repair, thus voiding
the warranty.
Step 1:
Lay the Aqua Buddy on a flat surface. Make sure there are no sharp
objects under the product that might puncture the tube.
Step 2:
Using a hand pump or powered inflator, inflate center seat first and
then both pontoons until each just feels firm. Note: A firmly inflated
product will perform better than a soft one. DO NOT OVER INFLATE.
INFLATE ONLY UNTIL FIRM.
Moisten the plug of the clear stem valves prior to inserting into
the valve and push plug down fully into the valve body.
Note that the air pressure in the product will fluctuate depending on air
and water temperatures. Adjust the air pressure in the tube accordingly
throughout the day to maintain proper firmness for use.
To Deflate:
•
Remove all of the plugs and place deflating straws into valves or
squeeze the valves to release the air.
5
