Troubleshooting
Air chamber(s) won’t hold air:
•
Check stem valves to ensure plugs are fully seated down into the
valve body.
•
Check for holes in bladder following the procedures in the
“Repair” section.
Cleaning and Storage
When the inflatable product is not being used, we recommend
that you store it in a covered, shaded area. This will help protect it
against ultraviolet (UV) rays and extend the life of the product.
Clean the inflatable completely with a mild soap and fresh water.
NEVER USE PETROLEUM BASED PRODUCTS OR SOLVENTS
FOR CLEANING.
Product should be completely dry and remain dry while stored.
Roll the product loosely and place in a vented storage bag or
container.
Store in a cool, dry location. Do not store product directly on
concrete surface. Place mothballs around stored inflatable to
keep mice and insects away.
Repairs
For minor holes or tears:
Inflate the tube and locate the leak by spraying the tube with
soapy water. Bubbles will appear where there is a leak.
Determine the hole size and cut a circular patch ½ - 1 inch wider
than the hole.
Remove air from the tube and dry tube completely where the
patch is to be applied.
Peel off paper back from patch, apply repair patch to area and
work out any air bubbles from beneath the patch.
Apply weight to the patched area for one hour before re-inflating.
13
