Operation Manual RAVAS Proline Touch Basic
Rev. 6
7
8 hours
1.
2.
1
Introduction
1.1
The Weighing Hand Pallet Truck
1.1.1
Startup
Press
-key to switch the terminal on.
After approx. 3 to 5 minutes the electronics and the loadcells have reached their operating temperature.
Before that deviations of up to 0.3% may occur.
Please set display to zero before weighing loads.
1.1.2
Operation
A fully charged battery provides power for approx. 10 hours of uninterrupted operation.
To avoid damages to the battery it should never be completely discharged. Deep discharge strongly reduces
the life time of the battery. Charging at regular intervals ensures full operational availability.
Charger:
When the battery packs are being charged, the red LED is on. After the charging time of 8 hours
min. has elapsed, the charger is switched off and the batteries are fully charged. The LED signal turns from
red to green.
Important note:
Both battery packs should always
be charged at the same time!
Charger
Attention:
When the charger is connected to 230 VAC mains supply and no battery pack is plugged in, the
green LED is on. The battery packs are protected against overcharging by the auto shut-off function of the
charger.
The weighing hand pallet truck is equipped with a battery change module. After opening the door, the battery
packs can be removed from the compartment and replaced with a new set. This provides for continued
availability of the weighing system.
Removing the battery packs
