Page
20
of
26
Printer manual
PR-TM-295
Picture
Paper loading
Use only the specified type of paper for this printer. Do not use inappropriate types of paper, or it could
cause malfunction or damage of the printer.
The following procedure describes how to print on paper. Before trying to print,be sure to install a
ribbon cassette into the printer using the procedure under “inkt ribbon change” on page 22.
Make sure that the printer is plugged in and turned on.
Check that the
RELEASE
indicator on the control panel is lit. If the indicator is not lit, press the
RELEASE
button until the indicator lights up.
Important!
Insertion and removal of paper should be done only when the printer is released condition (the paper is
not held by paper feed roller).
ENGLISH
Place a piece of the paper onto the printer’s document table and slide its right edge into the
printer. Printing will be performed on the side of the paper that is facing up (the one you can
see), starting from the top of the paper.
Important!
Do not use wrinkled or curled paper. In case of multiple paper, neatly align the
sheets.
