9
WARNING!
When the steam ironing is used, the water may leak out from the iron hot shoe, if the selected
temperature is too low. If this happens, turn the temperature controller to the recommended position. Steam
ironing may be resumed once the right temperature is reached.
Steam burst
The feature provides an additional amount of steam for stubborn creases removal.
Fill the iron with water.
Turn the temperature controller to ‘MAX’.
The control lamp will go off, when the required temperature is reached.
The iron is ready for use.
Press the steam burst button once (the steam permeates the clothing and removes creases).
Wait a few seconds before pressing the steam button. Usually, all creases may be removed with
three presses.
Anti-Calc
The Anti-Calc feature filters minerals from the water to prevent them from setting in the steam chamber.
Self-Clean
Use the Self-Clean feature to remove contamination and scale.
Use the feature once every two weeks. If the water used in the iron is very hard, the Self-Clean feature should
be used more frequently.
1.
Disconnect the iron from the power source.
2.
Turn the steam level controller to ‘0.’
3.
Fill the water reservoir to the maximum level.
4.
Select the maximum ironing temperature.
5.
Insert the plug into the socket.
6.
Unplug the iron when the lamp switch off.
7.
Hold the iron over the sink, press and hold the Self-Cleaning button, and gently shake the iron. The
steam and hot water, together with the contamination and scale, will fall out through the holes (if
there is any).
8.
Release the Self-Cleaning button as soon as the entire water in the reservoir is used.
9.
The self-cleaning process should be repeated, if the iron is still heavily contaminated.
CLEANING AND CARE
Unplug the power cord from the electrical outlet. Allow some time for the device to cool down.
For cleaning the appliance use a soft and damp (not wet) cloth and a delicate cleaning agent. Do not use
solvents, gasoline and other agents which may damage the appliance. Do not use elements which may damage
the heating surface (wire cleaners, scrubbing cleaning agents).
Do not immerse in water.
Use extreme caution when cleaning the hot shoe.
Any residue on the hot shoe may be removed with a cloth dampened in a solution of vinegar / water.
TROUBLESHOOTING
Disconnect from the mains and contact authorized service centre for possible repair.
TRANSPORTATION AND STORAGE
Before putting the device away, wait until it cools down. Keep and store in a package protecting from humidity
and mechanical damages. Keep away from children.
NOTE !
The illustrations and descriptions may differ from reality depending on the product model.
Manufacturer reserves the right to change the technical parameters of the device without notice.
