Ravanson PM-8500, User Manual

Page: 15 / 67

1. POWER - On/off switch
2. MODE - switch between COOLING, DEHUMIDIFYING AND FAN; The selected function is signalled by a LED,
respectively: COOL (Cooling), DEHUM (Dehumidifying), FAN
3. SPEED
-
setting fan speed ( H – highest, L – lowest)
4. DOWN - in the COOLING mode, to reduce target temperature
5. UP - in the COOLING mode, to increase target temperature
6. SLEEP - (work at night) - in the COOLING mode, to switch the sleep mode on/off
7. SWING - airflow control by the appropriate positioning of the louvre
8. TIMER
-
Setting the air-conditioner unit operating time. It is possible to set the air-conditioner unit
operating time from 1 h to 24 h.
VI. REMOTE CONTROL
1. WŁĄCZ / WYŁĄCZ
2. TIMER
3. DOWN
4. MODE
5. UP
6. SPEED
7. SLEEP PM-8500S PM 8500
8. SWING
PM-9500S PM 9500
VII. OPERATION
After the device is plugged, the current temperature in the room where the air-conditioner has been placed is
displayed.
When the air-conditioner is first switched on by the POWER button, it starts operation with low speed in the
cooling mode, with 22 C set by default.
MODE button
By pressing the MODE button you can change the device operation mode:
1. COOL (cooling)
Press UP/DOW to set the temperature (from 16 C to 31 C)
Press SPEED to select high or low speed
FAN
Press SPEED to switch on quick or slow fan rotational speed
PLEASE NOTE!
In the FAN mode:
a. you cannot set the SLEEP mode;
b. you cannot set the temperature, the device operates like an ordinary fan
2. DEHUM (dehumidifying)
PLEASE NOTE!
In the DEHUM mode:
•
you cannot change fan speed
•
you cannot set the SLEEP mode
SPEED and SLEEP functions are inactive The device operates with low speed.
TIMER button
Delayed start
The device can be programmed to switch on after the specific time has elapsed - delayed start. Press TIMER in
the standby mode. The time left before the device is switched on is displayed. By pressing the button once you
can increase the time left to start by 1 h.
To cancel the timer setting, switch the air-conditioner on manually by pressing POWER or keep pressing the
TIMER button until its LED goes out and "00" appears on the display.