Cooling your room
Select the cool mode to lower the temperature in your room.
Press MODE button repeatedly until the LED of COOL operation lights up.
Press ADD/MINUS button to adjust the temperature which is displayed on the screen. The
temperature can be set between 16
ć
and 32
ć
.
Press SPEED button repeatedly until the desired fan speed indicator lights up.
To control the direction of the air flow, please adjust the louver by hand.
Note
˖
The air conditioner stops if the room temperature is lower than the selected
temperature.
Heating your room
Press MODE button repeatedly until the LED of HEAT operation lights up.
Press ADD/MINUS button to set the temperature higher than the room temperature. The fan
speed can also be set.
Note:
The drainage hose should be attached to the unit for continuous operating.
Ventilating your room
Press MODE button repeatedly until the LED of FAN operation lights up.
In ventilation mode the room air is circulated, but not cooled.
Press SPEED button repeatedly to select the fan speed as desired
Dehumidifying your room
Press DEHUM button or mode button on the remote control, the LED of DEHUM operation
lights up. The fan speed is unable to select. User should connect the hose to the drain outlet
at the bottom of the unit. The drain hose is needed as well as in heat operation mode.
Note: in this mode, the fan speed switches over to low speed and cannot be selected.
Smart mode
In smart mode the cool, heat and fan mode will be regulated depending on the room
temperature and the target temperature.
Press MODE button repeatedly until the LED of smart operation lights up.
The unit starts with 23
ć
target temperature as default.
1. At a temperature of
ı
24
ć
, the unit operating at cool mode.
2. At a temperature between 22
ć
and 24
ć
, the unit operating at fan mode.
3. When the room temperature below 22
ć
, the unit operating at heat mode.
