CHOOSE YOUR LOCATION
Place the unit on a firm, level surface in an area with at least 50cm of free space around it
allow for proper air circulation.
Do not operate in close proximity to walls, curtains, or other objects that may block inlet and
outlet. Keep the air inlet and outlet free of obstacles.
If tipped more than 45°, allow the unit to set upright for at least 24 hours before start up.
Never install the unit where it could be subject to
˖
-
Heat sources such as radiators, heat registers, stoves or other products that products
that produce heat.
-
Direct sunlight
-
Mechanical vibration or shock
-
Excessive dust
-
Lack of ventilation, such as cabinet or bookcase
-
Uneven surface
WARNING!
Install
the unit in rooms which exceed 10 m².Do not ins
tall the unit in a place where
inflammable gas may leak.
Attach the exhaust hose
The air conditioner requires being vented outside so that the exhaust air can escape the room
which coming from the appliance contains waste heat and moisture.
Do not replace or extend exhaust hose which will result in decreased efficiency, even worse
shut down the unit due to low backpressure.
Step 1:
Connect the hose connector to one end of the exhaust hose.