Ravanson OH-07, User Manual

Page: 11 / 49

11
1. The heater should be placed on a level surface. Choose the place carefully and take the casters into
consideration.
2. The distance between the device and other objects, in particular inflammable objects, has to be at
least 2 m.
3. Do not cover the device with clothes or other cloths.
4. Do not use the oil heater to dry clothes.
5. Place the device far from other hot surfaces, inflammable objects (curtains, upholstery, etc.)
inflammable gases, explosives, and easily deformed materials.
6. Do not use the heater in the bathroom when taking a bath or a shower.
7. Unplug the heater when not in use.
8. The power cord should not touch the heater when it is on.
9. Never use the device outside.
10. Do not leave the device unattended when in use.
11. Contact the manufacturer or technical service in the case of a leak.
12. When disposing of the device follow regulations applicable to disposal of oil.
13. It is normal for the heater to emit some odor when it is turned on for the first time. When using the
heater for the first time, set it to maximum power for two hours and open a window to let the smell
of the new device out.
INSTALLATION OF THE CASTERS
1. Turn the heater upside down and put it on a soft surface to prevent scratching of its surface.
2. Screw caster disc to the heater with the wire and wing nuts.
3. Push each caster on pins on the disc until they click in the right place.
4. Turn the heater back to the upright position.
WARNING: Do not operate without feet attached. Do operate the heater only in upright position (feet on
the bottom, controls on the top), any other position could create a hazardous situation.