Ravanson CS-20S, User Manual

Page: 12 / 49

C. SWITCHING THE WORK MODE
ATTENTION!
Do not switch the heating function (HOT) or cooling function (COLD) when the device operates!
Before you switch to the cooling function (COLD) from the heating function (HOT) or to the heating function
(HOT) from the cooling function (COLD) you always should:
1. Switch the device off
2. Open the fridge for about 30 minutes to ensure equal temperatures
3. Switch the function and turn the device on
VI. CLEANING, MAINTENANCE, TRANSPORT AND STORAGE
ATTENTION!
1. Before any cleaning, disconnect the power cord from the outlet.
2. Never clean the device with running water.
3. clean the inside and outside of the appliance by wiping with a slightly wet (not wet), soft cloth with
mild detergent. Do not use solvents, petrol, alcohol and other measures that would damage the
device. For cleaning do not use harsh detergents.
4. Store out of reach of children. Protect against dust, humidity, and mechanical damage.
5. Transport in the original packaging. Protect against dust, humidity, and mechanical damage.
VII. POSSIBLE DISRUPTION
First ensure the operating instructions were followed for the fridge and then check:
•
If the power cable is connected correctly and if the lighter operates as appropriate?
•
If the POWER SWITCH is in the position corresponding to the power source?
•
If the fridge is placed in a way ensuring unrestricted circulation of air and ventilation of the chilling
unit?
•
If the fuse in the power cable plug 12V is OK?
•
If there is voltage in the power socket 220-240V?
If you are unable to remove any defects in operation, please contact the authorized warranty service.
Such a marking informs that this equipment cannot be disposed of together with other household waste. The user
is obliged to pass the device to a company authorized to dispose of electronic/ electric devices. Both
the person who deals with direct disposal, shops and other local units make a system enabling to dispose
of the device. Proper procedures concerning electric/electronic equipment disposal are intended to avoid
any harmful impact to humans and environment resulting from dangerous components and improper
storage or processing of the devices. Substances having negative environmental impact have been reduced
to make the product safer after its disposal.
12V connection -
power supply from the
vehicle lighter port
220-240V, 50Hz connection -
mains power supply