BEFORE FIRST USE
Before first use, rinse the kettle and boil water in it several times (min 3 x), using clean water for each cooking
cycle and filling the kettle to the top of the label.
Place the base on a stable and level surface.
Pour the required amount of clean water into the kettle. Do not touch any parts of the kettle except the handle
when the appliance is working; make sure the lid is properly closed. You may check the amount of water on the
level indicator on the outside of the kettle.
Always fill the appliance above the specified minimum level. Never fill the appliance above the specified
maximum level.
Always make sure that the lid is properly and tightly closed.
Place the kettle on the base so that the bottom of the kettle fits precisely to the base.
Insert the plug into the wall socket.
Set the switch to position “I” (on) to start the heating process; the indicator light will go on.
When the water is boiled, the switch automatically returns to the position “O” (off), and the indicator light goes
off. The kettle may also be switched off manually by turning the switch to “O.”
If the appliance switches off before the water is boiled, the kettle should be decalcified, descaled.
In order to remove the scale, you may use any descaler.
Please follow the instructions provided by the manufacturers of descalers.
After descaling, the kettle should be thoroughly washed like before first use.
Should you accidentally let the kettle operate without water, the boil-dry protection will automatically switch
off the power. If this occurs, allow the kettle to cool before filling with cold water to reboil.
CLEANING AND CARE
For cleaning the appliance use a soft and damp (not wet) cloth and a delicate cleaning agent. For cleaning
surfaces in contact with food use a cleaning agent provided for such surfaces. Follow the guidelines of the
cleaning agent’s manufacturer. Do not use solvents, gasoline and other agents which may damage the
appliance.
REMOVAL OF MINERAL DEPOSITS
Your kettle should be periodically descaled as the mineral deposits in tap water may form scale at the bottom
of kettle interior so as to cause the operation less efficiency. You can use the commercially available descaler
and follow the instructions on the package of descaler. Alternatively, you may follow the below instructions to
use the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to the amount so as to cover the bottom of
kettle completely. Leave the solution in the kettle overnight.
2. Then discard the mixture in the kettle, then filling the kettle with clean water, boiling and then discard the
water. Repeat several times until the odor of vinegar has been flushed away. Any stains remaining inside the
spout can be removed by rubbing with a damp cloth.
TROUBLESHOOTING
Disconnect from the mains and contact authorized service centre for possible repair.
TRANSPORTATION AND STORAGE
Before putting the device away, wait until it cools down. Keep and store in a package protecting from humidity
and mechanical damages. Keep away from children.
Such a marking informs that this equipment cannot be disposed of together with other household waste. The user is
obliged to pass the device to a company authorized to dispose of electronic/ electric devices. Both the
person who deals with direct disposal, shops and other local units make a system enabling to dispose of the
device. Proper procedures concerning electric/electronic equipment disposal are intended to avoid any
harmful impact to humans and environment resulting from dangerous components and improper storage or
processing of the devices. Substances having negative environmental impact have been reduced to make the
product safer after its disposal.
