Ravanson 0063CS7947, User Manual

Page: 11 / 22

11
Always connect or replace the cylinder in a well-ventilated area and away from any source of ignition, never
in the presence of a flame, spark or heat source.
Cylinders must be stored outdoors in an upright position and out of the reach of children. The cylinder must
never be stored where temperatures can reach over 50 ͦC. Do not store the cylinder near flames, pilot lights or
other sources of ignition. DO NOT SMOKE.
This barbecue is designed for use outdoors, away from any flammable materials. It is important that there are
no overhead obstructions and that there is a minimum distance of 122cm from the side or rear of the appliance.
It is important that the ventilation openings of the appliance are not obstructed. The barbecue must be used on
a level, stable surface. The appliance should be protected from direct draughts and shall be positioned or
protected against direct penetration by any trickling water (e.g. rain).
Make sure that the gas cylinder compartment (if any) is not obstructed, keep it ventilated and clean.
Parts sealed by the manufacturer or his agent must not be altered by the user. No modifications should be made
to any part of this barbecue.
All repairs should only be carried out by an authorized RAVANSON service center.
Connection to Appliance
Before connection, ensure that there is no debris caught in the head of the gas cylinder, regulator, burner and
burner ports. Spiders and insects can nest within and clog the burner/venturi tube at the orifice. A clogged burner
can lead to a fire beneath the appliance.
Clean burner holes with a heavy-duty pipe cleaner.
Disconnect the regulator from the cylinder (according to the directions supplied with the regulator) when the
barbecue is not in use.
The Barbecue must be used in a well ventilated area. Do not obstruct the flow of combustion air to the burner
when the barbecue is in use. ONLY USE THIS BARBECUE OUTDOORS.
BEFORE USE CHECK FOR LEAKS
Never check for leaks with a naked flame, always use a soapy water solution!
TIGHTNESS
ATTENTION!
After every cooker connection to the gas cylinder check the tightness of the cylinder valve,
connection of the pressure-reducing valve with the cylinder and its operation.
NOTE!
1. Do not check tightness with open flame (e.g. match or candle). This may cause explosion! Use soapy
water to check tightness.
2. Check the hose and connection tightness periodically according to the applicable regulations.
TO CHECK FOR LEAKS
Make leak detecting solution by mixing one part washing up liquid with 3 parts water.
Ensure the control valve is “OFF”.
Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the connections are secure then
turn ON the gas.
Brush the soapy solution onto the hose and all joints. If bubbles appear you have a leak, which must be rectified
before use.
Retest after fixing the fault
Turn OFF the gas at the cylinder after testing.
If leakage is detected and cannot be rectified. Do not attempt to cure leakage but consult your gas dealer.
Lighting Instructions for barbecue
1. Open the hood of the barbecue before attempting to light the burners.
2. Turn all the control knobs clockwise to “OFF” position.