Proceed as follows.
1.
Stand on the side of the equipment.
2.
Locate the panel that must be removed.
3.
Loosen the screws that block the panel
using an hexagonal wrench no. 3.
4.
Remove the panel.
A ground cable is connected to the side panels.
The purpose of this connection is to guarantee electrical
protection for the operator in case of current leakages and
avoid shock hazards.
Pay the utmost attention to not disconnect the ground
cable while removing the side panels.
In case of accidental disconnection:
1.
Turn off the equipment.
2.
Restore the connection.
| YUCON | 38 | en
| 2024-03-01
Ravaglioli