QuickLock Operator Manual
33
QuickLock Operator Manual
– Version 15.07.01
2.6.3. Root penetration
When there is existing root penetration, a special method can be used.
This prevents the root from growing along the QuickLock sleeve and breaking through the
circumferential seals.
However, although this method has had positive long-term results, we cannot guarantee its success.
Use highly alkaline mineral-based flexible mortar.
You must use a product with adhesive properties so that the material applied is not lost in the
pipe during transportation of the sleeve.
You must use a product which is flexible - this means the material will stretch along with the
rubber gasket and prevent it from cracking in the process.
Before installing the QuickLock sleeve, remove all
protruding roots.
Apply a band of mortar to the rubber gasket
The entire way around the sleeve circumference
In an approx. 6 inches (15 cm) wide spread
Layer it on up to the maximum height of the
circumferential seals.
Approx. 6”
