minCam Manual
9
6.2 KK55SL Roller Skid
(
greater than 5”)
The KK55 roller skid has a two-step installation procedure
(See figure 6.3.a):
1. Slide the KK55 camera into the back of the skid.
2. Spin the screws on the bottom of the skid to hold the
camera in place.
6.2.1 KK55SL exchange rolls
(greater than 8”)
The exchange rolls are larger diameter wheels for the KK55
Roller Skid. (Figure 6.3.1.a)
1. Use a 3mm hex screwdriver to remove the screws that
mount the 5” rolls to the skid.
2.
Mount the six 8” rolls using the supplied 3mm hex
screws in place of each of the 5” rolls.
3. Slide the KK55 camera into the back of the skid.
4. Spin the screws to hold the camera in place on the
bottom of the skid.
Figure 6.3.a
– KK55 5” Roller Skid
Figure 6.3.1.a
– KK55 8” Roller Skid
