background image

NKI1480B DAX60 and DAX120 Amplifiers—Installation

Page 17 of 18 (Jul-98)

Appendix A: Limited

Warranty/Service Policy

Limited Warranty

This warranty supersedes any warranty or guarantee that may appear on any printed
material packed with any product or any warranty or guarantee previously issued
by Rauland-Borg Corporation.

Rauland-Borg  Corporation warrants equipment manufactured by it to be free from
defects in material and workmanship arising from normal usage for a period of one
year from date of shipment by Rauland-Borg.

Our obligation under this warranty is limited to repairing any such defect and/or
replacing any such defective part, provided the unit and/or the defective part is
returned to us, transportation prepaid, within one year after date of original
shipment by Rauland-Borg and found by our inspection to be defective in materials
and workmanship. The obligation of Rauland-Borg Corporation is limited to the
above and does not include either the cost or the furnishing of any labor in
connection with the repair of any such defect and/or replacement  of any such
defective part unless accomplished at Rauland-Borg, nor does it include
responsibility for any transportation expense.

This warranty is extended only to the original purchaser chaser from Rauland-Borg
and is not transferable, and covers only equipment either installed by or under the
direct supervision of a factory-trained arid authorized Rauland distributor. This
warranty does not extend to any product which has been subject to misuse, neglect,
accident, improper repair, or alteration. Accessories not of our manufacture used
with this equipment are not covered by this warranty.

All implied warranties, including but not limited to implied warranties of fitness
and merchantability, are limited in duration to a period ending one year from the
dale of shipment by' Rauland-Borg.

A

Summary of Contents for DAX60



















Reviews: