Operator's Manual SA 250/360/601/WB 250
RAUCH Landmaschinenfabrik GmbH
17
3.3
Adjustment of the spreading quantity
The spreading quantity is set by opening the metering slide (with the quantity selection lever).
For example: lever towards the higher numbers on the scale means: metering slide is opened
wider for greater spreading quantity.
1 = Quantity selection lever
2 = Scale
3 = Adjustable quantity stop
Important
Avoiding excessively small slide openings
Small slide openings may cause the
•
material to be ground or damaged,
•
block the slide opening
•
and increase the wear on the stirrer mechanism.
Always select a sufficiently large slide opening
to allow the material to be discharged easily.
3.4
Limiting the spreading width
The spreading width can be limited by various settings of spreading widths between
approx. 0.8 m - 6 m, (approx. 9 m with the WB 250, depending on the material),
at a hopper height (distance between broadcast disc and ground) of approx. 70 cm.
Intermediate spreading widths can be set by raising or lowering the spreader.
NOTE
Damaged or bent spreading width limiters will yield an inexact scatter pattern
(e.g. different spreading widths to right and left).
