Rauch K 51, Instruction Manual

Page: 54 / 64

Maintenance and service 9
48
9.5 Replacing the spreader vanes
Determination of spreading vane type:
9.5.1 Replacement of spreading vanes:
Figure 9.4: Loosen the spreading vane screws
n
CAUTION
Conformity of the spreading vane types
The type and size of the spreading vanes are adapted to the
spreading disc.

Only mount spreading vanes approved for the correspond-
ing disc.
NOTICE
This diagram shows the principle of spreading vane replacement. The spread-
ing disc shown does not correspond to the spreading disc installed in your ma-
chine.