5
Spreading operation
The machine control unit helps you to enter the machine settings before starting work. During
spreading, functions of the machine control unit are also active in the background. This allows you to
monitor the quality of the fertilizer spreading.
5.1
Working with sections
You can adjust the working width when activating or deactivating the sections. These settings can be
configured directly in the working screen. You can use these to optimally adapt them to the field
requirements during spreading operation.
Button
Spreading type
Switching off the section from the left to the center
Activating the section from the center to the left
Switching off the section from the right to the center
Activating the section from the center to the right
u
Press the function key several times until the desired working width is displayed.
5.2
Spreading with the AUTO km/h operating mode
This operating mode is applied by default for machines without a weighing system.
Requirements for spreading:
•
The AUTO km/h operating mode is active (see
).
•
The fertilizer settings are defined:
○
Application rate (kg/ha),
○
Turns/kg
5. Spreading operation
AERO ISOBUS
5903001
57
Summary of Contents for AERO ISOBUS
Page 16: ...2 3 Structural menu overview 2 Layout and function 16 5903001 AERO ISOBUS...
Page 65: ......
Page 66: ......
