Rau adlatus 150, Operating Manual

Page: 43 / 44

19
If parts of the workstation cause unusual noises or odors during operation, immediately
unplug the power plug or switch off the battery.
7. Maintenance
7.1 Maintenance work
Before every use, check the workplace for visible signs of wear and/or damage.
Do not carry out any maintenance or servicing work on the base of the workplace or live parts.
These must only be carried out by authorized electricians by the manufacturer, see 1.3.
Disconnect the mains plug before any maintenance and service work.
Electric shock from touching live parts will result in serious injury or even death.
7.2 Accessories / Spare Parts
Only use original accessories and spare parts. Spare parts may only be installed by expert service per-
sonnel from the manufacturer, see 1.3. Otherwise you lose warranty and warranty claims.
7.3 Cleaning
Do not use aggressive cleaning substances. Do not use a high pressure cleaner for cleaning.
8. Disassembly and Disposal
Disconnect the power plug before disassembling and make sure that it can be switched on
unattended.
Dispose of the product according to the national and international regulations of your country.
The control, switch and motor are electrical devices within the meaning of Directive 2006/42/EG. It
is recommended that they be broken down as far as possible into the waste categories metal, plastic,
cables, fuels and reusable materials in order to dispose of them and reuse them. Dispose of other
components in an environmentally friendly way.