background image

11

©

2000 Directed Electronics, Inc.

Glossary of Terms  

Control Unit: 

The “brain” of your system. Usually hidden under-

neath the dash area of the vehicle. It houses the microprocessor

which monitors your vehicle and controls all of the system func-

tions.

Failsafe

®

Starter Kill:

Located on-board the control module, this

is an automatic switch controlled by the system which prevents

the vehicle’s starter from cranking whenever the system is armed.

The vehicle is never prevented from cranking when the system is

disarmed or if the starter kill switch fails. 

LED:

Red light mounted somewhere in the vehicle. It is used to

indicate the status of your system. It is also used to report trig-

gers and faults in the system or sensors.

Transmitter:

Hand-held, remote control which operates the vari-

ous functions of your system.

Valet

®

Switch:

A small push button switch mounted somewhere

inside the vehicle that is used by the installer for programming the

system. It can also be used to override the starter kill and other

expansion options that have been added to your system. Consult

your dealer for details.

Summary of Contents for 421R Series





















Reviews: