ratotec TRemote, User Manual

Page: 40 / 50

40
4.2 Trace on/ off
In the of on-line case can the layer - 1, -2 and -3 activities is transference-
speaks. If the function should be switched off, at storage-news, appear to
the wants Trace protection. The pre-determined Trace number become
through numbered and can if necessary is altered.
4.3 Internal trace
So that an exact reconstruction of a mistake is possible, the application of
the duration is very important traces. By activating, all activities of the D-
canals are set aside in the storage of the Routers. This happens as long as,
until this function is deactivated. The storage capacity is restricted on 1000
lines so that the oldest lines are headed.
With the storage of the telegrams, they are restricted on a length of 55
bytes, has been treated completely in the Router however.
4.4 Int. Trace read
In the case of the Internal traces (internal Traces), Trace data can from the
storage of the Routers hereby since is transference-speaks the latter elite.
The Trace data ary shown in the Trace windows and one succeeded
through double-click into the Trace analysis, lake's Trace analysis.
4.5 Int. Trace all lines read
This function finish's reading the complete storage of the Routers. Therefore
here is necessary on the other hand at prior a ctivating of the internal traces.
Therefore brightly lines, that contain no meaningful piece of piece of
information, belong to the Trace data.
The harvest of all Trace lines is meaningful, if taken place at Router latest-
type or at battery-buffered Router version is available.
The Trace data ary shown in the Trace windows and one succeeded
through double-click into the Trace analysis.