Ratoc Systems REX-USB61 User Manual Download Page 7

Page: 7 / 75

1.Introduction Page.1-5

number

Housing color

Cable

color

Signal

Usage

11 White(Gray) Gray GND

Ground

12 White(Gray) Red GND Ground
13

White(Gray) Orange

DO0

SS0 for SPI/PORT0 for I2C (1.8 - 5V)

White(Gray)

Yellow

DO1

SS1 for SPI/PORT1 for I2C (1.8 - 5V)

White(Gray)

Green

DO2

SS2 for SPI/PORT2 for I2C (1.8 - 5V)

White(Gray)

Blue

DO3

SS3 for SPI/PORT3 for I2C (1.8 - 5V)

17 White(Gray) Purple GND Ground
18 White(Gray) Gray GND Ground
19 White(Gray) White N.C. N.C.
20 White(Gray) Black N.C. N.C.

(1-4) Each mode

The below explains master/slave mode on SPI /I2C bus.

Bus

Operation

SPI Bus

Master mode

This mode can select a slave, send data,
display data received from the slave.

Master mode

This mode can send data to a particular
address, display data received from the slave.

I2C Bus

Slave mode

This mode can display data received to self
-address, send data to master.

You can select master mode or slave mode of REX-USB61 by the bundled
utility software or API library.

Summary of Contents for REX-USB61











































































Search results

Summary of Contents for REX-USB61

Reviews:

Brands by name

Popular brands

Ratoc Systems REX-USB61, User Manual

Search results

Summary of Contents for REX-USB61

Reviews:

Brands by name

Popular brands