4-2. Rear Panel
[Line Out]
Stereo( L, R ch. ) Audio analog line out
[USB]
Connect to USB-A port of PC or Mac with USB 2.0 HS compliant cable
[EXT CLK IN 10MHz 50
Ω
]
To use Rubidium external clock, you must follow the steps below:
1.
Power off RAL-DSDHA2.
2.
Connect Rubidium Oscillator to RAL-DSDHA2 with BNC coaxial
cable(50-Ohm impedance).
3.
Power on Rubidium Oscillator and wait until Oscillator output is stable.
4.
Power on RAL-DSDHA2.
Rb(Rubidium) LED at the front panel will come on.
※
When you stop using an external oscillator, power off RAL-DSDHA2, and then,
unplug BNC cable and power on RAL-DSDHA2.
[AC IN]
External Power input jack
[POWER]
Power switch
pg. 7
