Ratoc Systems EX30S, User Manual

Page: 6 / 20

eSATA ExpressCard/34
EX30S
User's Guide
1
2
3
4
5
6
Introduction * * * 2
-1. Package Contents * * * 2
-2. Layout * * * 2
-3. System Requirements * * * 3
-4. Specifications * * * 3
-5. Caution * * * 4
Setup * * * 5
-1. Installation on Windows System * * * 5
-2. To Verify Driver Installation (Windows) * * * 7
-3. Hot-plug tool (Windows) * * * 8
-4. Installation on Mac system * * *10
Connecting/Removing eSATA drive * * *11
-1. Windows * * *11
-2. Mac * * *15
Removing ExpressCard * * *16
-1. How to remove EX30S on Windows * * *16
-2. How to remove EX30S on Mac * * *16
Registration & Tech-Support * * *17
-1. Registration * * *17
-2. Tech-Support * * *17
Appendix * * *18
Contents
-1. Package Contents
Introduction
1
1
-2. Layout
1
eSATA Connector
ExpressCard Connector
Support Port Multiplier)
-3. System Requirements
1
-4. Specification
1
What's Port Multiplier(PM)?
?
..
..
..
.
5
-5. Caution
1
Setup Setup
2
Refer to 2-3, for the installation on Mac system.
Be careful that the card is not removed from the slot while setup
process.
Power on and start the system.
The EX30S works on both
ExpressCard/34 slot and
ExpressCard/54 slot.
-1. Installation on Windows system -1. Installation on Windows system
2
1.
Put the ExpressCard in the ExpressCard slot.
2.
Caution
Note
Insert the card while the system is powered
Found New Hardware Wizard
No, not at this time
Next
Install the software automatically(Recommended)
Next
Finish
Windows XP, Server 2003
Silicon Image SiI3132 SATALink Controller
-2. To Verify Driver Installation
2
Silicon Image SiI3132 SATA
Link Controller
What's HotPlug Tool
-3. HotPlug Tool (Windows)
2
Add or Remove Programs Control Panel
HotPlugTool Change or Remove Programs
OK
Start Program Hot plug tool
[A] Removing eSATA drive
Stop
[B] Change HotPlug Tool setting
HotPlug Tool Window
SCSI Disk
Device
-1. How to use HotPlug Tool (Windows Only)
3
Connecting/Removing eSATA drive
3
If the system recognizes the eSATA drive, the icon of HotPlug Tool will
Finish
Tool
Registration & Tech-support
5
Install HotPlug Tool
Uninstall HotPlug Tool
-4. Installation on Mac System
2
SiI3132_1.1.6u_Sil_Pkg
-2. Connecting/Removing eSATA drive on Mac
3
Removing ExpressCard
4
Safely Remove Hardware
Silicon Image SiI3132 SATALink Controller
-1. How to remove EX30S on Windows
4
-2. How to remove EX30S on Mac
4
Appendix
6
http://www.ratocsystems.com/english/
Software Update and Support
http://www.ratocsystems.com/english/
Technical Support
http://www.ratocsystems.com/english/contact/support.html
[A]
[B]
Power off Card
EX3
0S
EX3
0S
EX3
0S
EX3
0S
EX3
0S
EX3
0S