Rato R160, Service Manual

Page: 56 / 78

54
4-4-4 Carburetor
a
．
Disassembly/reassembly
Governor rod
Throttle return
spring
Disassembly
：
Unhook the throttle return
spring. Pull the carburetor
forward to a point where
the groove in the governor
rod lines up with the governor
rod, and lift the rod out of
its hole.
Reassembly ：
After pulling fuel hose from
the carburetor, insert it into
protruding shoulder of the
choke handle, preventing oil
leakage.
Reassembly
：
Blow out the passages with
compressed air and install, noting
installation direction. After
installation, connect the high tension
cord and fuel hose to the ground.
Insulator gasket
Carburetor assy.
Carburetor insulator
Choke handle
Throttle
Governor rod
Throttle
return spring
Groove
Carburetor gasket