Rational iVario Pro L, Original Installation Manual

Page: 6 / 72

1 | Introduction
6 / 72 80.06.231_iVarioProL-iVarioProXL_IM_en-GB
n
Installation, inspection, maintenance, and repair work must only be carried
out by trained technicians.
n
It is recommended that only technicians authorised by the manufacturer
perform inspection, maintenance and repair work.
n
The unit may not be used, cleaned, or maintained by children. The unit may
not be used for play. This is prohibited even under supervision.
n
The unit may not be used, cleaned, or maintained by people with limited
physical, sensory, or mental capacity or those without the necessary ex-
perience or knowledge, unless such people are supervised by a person
who is responsible for their safety and who has been informed of the haz-
ards of the unit.
n
In order to prevent accidents or damage, the manufacturer recommends
that technicians attend training and safety instructions.
1.3 Copyrights
Forwarding product-specific information to third parties is prohibited. We re-
serve the right to make technical developments and changes in the interest of
progress. All rights, including to translation and duplication, are reserved.
1.4 Conformity
Conformity refers to the unit as a whole at the time of delivery. The operator is
responsible for ensuring extended conformity following any expansions,
modification and connection of additional functions.
Observe the corresponding local and country-specific standards and regula-
tions regarding the installation and operation of commercial cooking appli-
ances.
Conformity Europe
n
The electricity connection has been constructed and tested according to
IEC 60335 in consideration of EN 60335 and VDE 0700.
n
The water connection has been constructed and tested according to IEC
61770 in consideration of EN 1717, DIN EN 13076 and EN 13077.
n
The drain connection meets the requirements of the applicable provisions
pursuant to SVGW/SSIGE and has been tested and certified accordingly.
n
The unit is approved for use at altitudes up to 4,000 m pursuant to IEC
60335.
Conformity USA and Canada
n
The unit is tested and built according to UL-197, CSA C22.2 no. 109 and
NSF 51.