9 | Wastewater connection
50 / 60
80.06.243_iVario Pro L_XL_IM_V01_en-US
9.2
Connecting the wastewater drain
n
The wastewater connection is located on the rear side of the device.
n
Diameter on the device drain: DN 50 mm
Installing the drain to the rear side of the device
a
The drain pipe is designed for a DN 50 mm device drain.
a
The drain pipe corresponds at least to type PP and is steam temperature
resistant.
1. Use a 90° elbow as the first and T-piece as the second pipe piece for the
drain pipe.
2. Connect the drain pipe to the side or leading downwards.
20 mm [3/4 Inch]
5%/3°
>>
The drain pipe is installed with an incline of at least 5 % or 3°.
Installing the drain to the front side of the device
When installing the wastewater drain to the front side of the device, a bracket
is required on the side of the device.
a
There is a drainage channel with a waste grating in front of the device.
1. Screw the bracket on to the bottom of the device.