10 | iProductionManager
56 / 112
Original instructions for use
Once the desired temperature is reached, you will be prompted to load the food. The
symbol appears next to
the rack level.
Once you have loaded the unit, the remaining time for which the food will remain in the cooking cabinet is shown
next to the rack level.
When the cooking process of the ticket is ended, you will be prompted to unload the unit. The
symbol appears
next to the rack level. The cooking time is at 00:00.
10.4.1
Combination check
For each ticket you want to place in the iProductionManager, a check is carried out to determine whether the new
ticket matches the already positioned tickets and can be placed at the selected time. The tickets are separated
based on the following 3 values and checked independently of each other:
n
Each ticket is assigned an operating mode. A check is carried out to determine whether the operating modes
match.
n
A cooking cabinet temperature is assigned to each ticket. A check is carried out to determine whether the
cooking cabinet temperatures match.
n
A cooking cabinet humidity is assigned to each operating mode. A check is carried out to determine whether
the cooking cabinet humidities match.
Both manual operating modes and intelligent cooking paths are checked for compatibility. You can only combine
cooking paths that are cooked in a consistent climate. Cooking paths that run through different climates, such as
low-temperature roasting, can not be combined with other tickets.
10.4.2
Positioning logic
Based on the combination check, the iCombi Pro decides where the ticket is placed. The tickets are positioned
optimally in the iProductionManager depending on the result of the check. A color marking in the rack levels
indicates whether a new ticket will impact the already positioned tickets in the iProductionManager:
n
If the rack levels are marked in yellow, you can place a ticket, but tickets that are already placed are moved.
n
If the background is red, you can not place the ticket because a ticket is already being processed.
If you move a ticket, the entire block in which the ticket was placed after the combination check is moved.
10.4.3
Close planning gaps
You can have time gaps that were created when placing tickets across all rack levels closed automatically by your
unit.
