27
TECHNICAL DATA
NOISE INFORMATION
VIBRATION INFORMATION
A weighted sound pressure
87.4 dB(A)
A weighted sound power
98.4 dB(A)
K
pA
& K
wA
3.0 dB(A)
Wear ear protection when sound pressure is over
80 dB(A)
WARNING:
The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
To use the correct accessory for the tool and ensuring it is sharp and in good condition.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING:
To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
Rated voltage
230-240 V~50 Hz
Rated power
810 W
No load speed
0-2800 rpm
Impact rate
0-44800 bpm
Chuck capacity max
13 mm
Drilling capacity max
Masonry
13 mm
Wood
32 mm
Steel
13 mm
Protection class
/II
Weight
2.42 kg
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete:
Vibration emission value a
h
= 12.77 m/s
2
Uncertainty K = 1.5m/s²
Drilling into metal:
Vibration emission value a
h
= 4.67 m/s
2
Uncertainty K = 1.5m/s²
Summary of Contents for TR810NM
