EV PORTABLE CHARGING CABLE 3-PHASE 16A-32A – EV025
Charging Current 16A
LED 6A
Ready/Charge
LED 10A
Ready/Charge
6A
10A
16A
6
7
O P E R A T I O N
F R O N T P A N E L D I S P L A Y
Charging Current 32A
LED 1 A
Ready/Charge
LED A
Ready/Charge
1 A
A
32A
The Ratio Electric Mode 2 Charge Cable offers maximum security when
charging your EV from a standard 3-phase red CEE outlet.
Just plug the wall plug into the red CEE 16A-32A wall socket. Always plug in
the wall socket first.
Now the Power LED will light up.
The 6A Ready/Charge LED will start blinking. You can change the charge
current by pressing the button. The chosen charge current LED starts blinking.
Plug the vehicle connector firmly into the vehicle’s charge port.
After a few seconds Ready/Charge LED stops blinking and will be lighting
continuously. Now the vehicle is charging at the selected current.
During the charging it’s not possible to change the charge current anymore.
When disconnecting the charge cable, always remove the vehicle connector
first then remove the plug from the wall socket.
Note:
For charge cables with 3-phase 16A plug you can choose between 6A,
10A and 16A.
For charge cables with 3-phase 32A plug you can choose between 10A,
16A and 32A.
Power fault: indicates that the wall socket is not wired correctly.
Charging fault: indicates that there is a communication problem.
If the Power Box continues to display the error during the charging, please
contact Ratio Electric for support.
