Ratio CR900NM, Instructions Manual

Page: 35 / 44

35
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
PLANER SAFETY WARNINGS
1. Wait for the cutter to stop before setting the tool down. An exposed rotating cutter may
engage the surface leading to possible loss of control and serious injury.
Note The above warning applies only to planers without an automatic closing guard.
2. Hold the power tool by insulated gripping surfaces only, because the cutter may contact its
own cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and could
give the operator an electric shock.
3. Use clamps or another practical way to secure and support the workpiece to a stable
platform. Holding the work by your hand or against the body leaves it unstable and may lead to
loss of control.
ADDITIONAL SAFETY RULES FOR PLANNER
1. Always wear a dust mask.
SYMBOLS
To reduce the risk of injury, user must read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Warning
Waste electrical products must not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.