Ratio Electric SMART BOX, Manual

Page: 30 / 52

www.ratio.nl
30
CHARGING
I set [A] : x x
Pt [W] : x . x
Et [kW] : kWh
lh : xx xx xx ( x x )
www.ratio.nl
Charging display
I set [A]
–
available current
Pt [W] - power
Et [kWh]
–
total consumption (never reset)
lh - x x : measured current ( x x ) : setting
I-MAX HOME
As in all other chosen charger modes you can reach the next screen with the right
arrow button.
The menu below can be reached with the arrow button from a READY TO
CHARGE screen but also from CHARGING screen.
Here you can find more information about the consumption:
I: current (A)
U: voltage (V)
P: power (kWh)
Et: total kWh value (never reset)
I: A
U: V
P: kWh
Et: kWh
www.ratio.nl
By pressing the middle button, you can see the meter readings of the last 5
sessions.
Et (1): kWh The values can be deleted by pressing the left and right
arrow buttons at the same time.
With the middle button you can go back to the previous
screen.
Et (2): kWh
Et (3): kWh
Et (4): kWh
Et (5): kWh
CHARGER ERROR
CHARGER
NOT READY
ERRCODE: ...............
www.ratio.nl
In case of the charger error, you will see the error
screen with the error code. If multiple errors occur the
codes will alternate.
By error message please contact Ratio Electric for
support.
To return into the setup menu please press the middle
button for 5 seconds.