Page 4
Quick Set-Up from Onboard Keypad:
1.
Program Number
a. Press
ENTER
b. Press
1, ENTER,
the number you want the
phone to dial,
STOP
2.
Program Message
a. Press
1, 3, Enter, 2
for message to play
twice
b. Press
6, RECORD,
after the “beep” speak
message, press
STOP
when finished
3.
Press
6, PLAY/PAUSE,
message will
playback
4.
Press and hold
STOP
for 3 seconds to exit
programming
Quick Set-Up using Remote Programming:
1.
Program Number
a. Call the phone number that the SmartPhone is installed on
b. After the first simulated ring, press
#, #
and wait for a
confirmation tone
c. Key in the security code (default is
1, 1, 1, 1
) and wait for
a confirmation tone
d. Press
1, *, (phone number), *, #
and wait for a
confirmation tone
2.
Program Message
a. Press
1, 3, *, 2
for message to play twice and wait for a
confirmation tone
b. Press
6, *,
after the “beep” speak location message, press
#
and wait for a confirmation tone
3.
Press
6, #
to play message back
4.
Press
*, # , 0
to exit programming and wait for a confirmation
tone
5.
Press
*, #
to hang up the phone
Programming Primary Phone Number
using Onboard Keypad:
1.
Press
ENTER
on the keypad to begin
programming
2.
Press
1, ENTER,
the number you want the
phone to dial,
STOP
3.
Press and hold
STOP
for 3 seconds to
exit programming
Note:
In situations where a delay is needed,
such as needing an 8 or 9 to dial out, use the
PLAY/PAUSE
button on the keypad. The button
can be pressed multiple times for a longer delay.
One
PAUSE
= 1 second.
Programming Secondary Phone
Numbers using Onboard Keypad:
1.
Press
ENTER
on the keypad to begin
programming
2.
Press
2, ENTER,
the number you want the
phone to dial,
STOP
Note:
SmartPhones can call up to 5 numbers.
Repeat the steps above for subsequent
numbers. Substitute 2 with 3, 4, or 5 depending
on the order you want the numbers to be dialed.
Example:
For the third number to be dialed,
it would be
3, ENTER,
phone number,
STOP
.
3.
Press and hold
STOP
for 3 seconds to exit
programming
Detailed Programming
Programming Primary Phone Number using Remote
Programming:
1.
Call the phone number that the SmartPhone is installed on
2.
After the first simulated ring, press
#, #
and wait for a
confirmation tone
3.
Key in the security code (default is
1, 1, 1, 1
) and wait for a
confirmation tone
4.
Press
1, *, (phone number),* , #
and wait for a confirmation
tone
5.
Press
*, #, 0
to exit programming and wait for confirmation tone
6.
Press
*, #
to hang up the phone
Note:
In situations where a delay is needed, such as needing an
8 or 9 to dial out, use
#, *
for a pause.
#, *
can be pressed
multiple times for a longer delay. One
PAUSE
= 1 second.
Programming Secondary Phone Numbers using Remote
Programming:
1.
Call the phone number that the SmartPhone is installed on
2.
After the first simulated ring, press
#, #
and wait for a
confirmation tone
3.
Key in the security code (default is
1, 1, 1, 1
) and wait for a
confirmation tone
4.
Press
2, *, (phone number), *, #
and wait for a confirmation tone
Note:
SmartPhones can call up to 5 numbers. Repeat the steps
above for subsequent numbers. Substitute 2 with 3, 4, or 5
depending on the order you want the numbers to be dialed.
Example:
For the third number to be dialed, it would be
3, *,
phone number, *, #.
5.
Press
*, #, 0
to exit programming and wait for a confirmation tone
6.
Press
*, #
to hang up the phone
